Minimum temperature:-50℃
Internal capacity:4L
Internal dimension:Φ160×200mm
With 304 stainless steel trap bath
Strength guarantee: 20 years of manufacturing experience,
24-hour after-sales service
* Minimum temperature:-50℃
* Internal capacity:4L
* Internal dimension:Φ160×200mm
* Cooling mode:Air-Cooled
* Power requirements:220V/50Hz/0.6kW
* Net weight:35kg
* Overall dimension:W360×D600×H300
Cold trap temperature -50、-80、-110、-135℃; Cold trap capacity 2、4、6、9、25 liters.
Vacuum cold trap, Cryogenic trap, Temperature stat cold trap.
Stainless steel, pure titanium, glass, Teflon coating.
Capture, condensation, separation, adsorption、purification,different solutions available.
*Stainless steel cold trap inner wall, teflon coating treatment, improve corrosion resistance.
*Water or ethanol can be directly condensed in the cold trap, other solvents can be optional with built-in glass condenser, or consulting manufacturers and agents.
*The advantages of direct condensation and trapping in the cold trap are large capacity, low cooling temperature, but some solvents will directly contact the cold trap inner wall, may bring the risk of corrosion.
*When directly condensing and trapping steam in a cold trap, a cold trap cover with a corresponding conversion interface is required.
*Stainless steel cold trap, optional stainless steel (SS) cover, Acrylic glass (PMMA) transparent cover, polycarbonate (PC) transparent cover.
* Used as a cold trap for centrifugal concentrator (fastdry-10).
* Used as a Freeze-drying bottle pre-freezing machine.
* Used as a low temperature trap.
* Used as a vacuum cold trap to condense and collect a variety of low boiling point gases.
* Protection of oil sealed vacuum pumps.